Description
Product Description
Specification:
Origin: Mainland China
Screen: 3.0 display
Wireless handle: 2.4GHZ
TV output: 720P
Memory: 128M
HIFI audio output
Supports dual battery power supply options and supports TV output!
Number of games: 339
Battery capacity: 800mAh
Host weight: 132.7g
Handle weight: 52.3g
Host size: 100.00×85.00×69.00mm/3.94×3.35×2.72inch
Basic operations:
1. The wireless handle P1 uses ordinary AAA (No. 7) batteries. Consumers can purchase standard batteries by themselves and put them into the battery compartment according to the instructions and polarity guide on the battery door. There is a 3.8V lithium battery in the game version of the console, and only the factory standard lithium battery can be used.
(If you use the battery incorrectly, the product will not work. There is a risk of damaging the product!)
2. For first use after unboxing, please charge the host for 4~6 hours. After charging is completed, press the reset button of the product system lightly for 1-3 times to initialize, so that the product parameters work optimally.
3. After fully charging, rotate the ON/OFF power switch to the ON position, and the host will turn on. At this time, the power indicator light will light up. The wireless handle P1 will be automatically paired and connected after the battery is installed. When the handle indicator light stays on, the handle is connected. OK. You can play single-player games on the console!
TV output instructions:
This product can display images on a TFT color screen or output it to a TV. When connecting to the TV, please use the standard TV cable in the box, insert the 2.5MM plug into the product jack, and connect the red and yellow plugs at the other end to the corresponding TV. AV input port.
Connection notes:
1. Adjust the TV to the corresponding AV input channel.
2. Connect the TV cable plug corresponding to the color of the TV AV input hole.
3. Yellow is the video signal and red is the audio signal.
Online instructions:
1. Turn on the game mode switch of the product and turn it to the ON state. After 1-2 seconds, the game list screen will appear on the display. To increase the game volume, rotate as indicated by the arrows on the panel.
2. Select the standard game console controller (FC-1F) specified for this product.
3. Open the battery box behind the FC-1F handle, put in AAA (7#) batteries, and the host will automatically connect to the handle to complete the automatic access of the P1 main handle.
4. Press the P1 controller direction keys to select the game list. Touch the START or A function key to execute singles games.
Note: The indicator light on the handle P1 flashes, indicating that it is not connected or has not been paired successfully. Please turn on and off the host again and press in the battery on the handle again to perform re-pairing connection. If the connection is successful, the light on the handle is always on and a button is pressed. , the light flashes.
Volume control and charging
1. Rotate the UHF knob to the "ON" position to turn on the game console and enter the game menu interface. Turn the console to the "OFF" position and continue to rotate the "UHF" switch to the right to enter the game volume control.
2. When the screen is white, blurred, the image is jittery, and the voice is hoarse and muted, please plug in the USB cable and connect it to the standard USB power supply at home for charging. It takes 4-6 hours to charge after unpacking for the first time. The charging wiring is as shown in the figure. Charging is complete. Or if a screen abnormality occurs during use, you can press the "SET" key on the panel to initialize the host system to factory values.
Notes on daily use
1. The wireless handle uses ordinary AAA (7#) batteries. Please follow the instructions on the battery door and the polarity guide to put it into the designated battery compartment, otherwise the product will not work.
2. Adult supervision is required when charging rechargeable batteries.
3. Please do not mix old and new or different types of batteries.
4. When the battery is not used for a long time, please remove the battery.
5. Please remove the exhausted battery.
6. The charging time of the rechargeable battery for the first time should not be less than 4 hours.
7. Please do not disassemble or attempt to repair this machine without permission.
8. Do not expose the machine to moisture or sunlight.
9. The precision components inside the product prevent the machine from being hit, dropped or improperly used.
10. Do not pour liquid into the machine or parts. Please pay attention to the dryness of the machine and parts when cleaning.
11. Please protect the display screen from damage or dirt.
12. To avoid screen damage, please clean the screen with a soft, dry cloth.
13. Do not turn on and off the power quickly and repeatedly, otherwise the service life of the machine will be shortened.
14. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
15. Please allow 1-2cm measuring deviation due to manual measurement.
Package Content:
1 x retro game console
1 x wireless handle
1 x Antenna
1 x AV cable
1 x USB cable
1 x Instruction manual
Reviews
There are no reviews yet.